Home> Blog> 2018 electric tricycle battery charging method, electric tricycle battery maintenance

2018 electric tricycle battery charging method, electric tricycle battery maintenance

November 18, 2022

The so-called battery is an electrical chemical device that stores chemical energy and discharges electric energy when necessary. Generally referred to as a battery. After the battery is discharged, the internal active material can be regenerated by charging - storing electrical energy as chemical energy; and converting the chemical energy into electrical energy when discharging is required. Let's take a look at the daily charging method of the electric tricycle battery. How to maintain the electric tricycle battery?

Electric tricycle battery charging method

Electric tricycle batteries are generally tubular traction lead-acid batteries. The model number is X XV-×XAh, such as l2V--120Ah. The front section indicates the nominal DC voltage of the lead-acid battery, and the latter section indicates the nominal capacity of the lead-acid battery. Before using the lead-acid battery, a sulfuric acid electrolyte having a density of 1.289/cm3 should be injected into the six cells of the battery. The electrolyte should be kept between the maximum and minimum liquid level of the battery. After the dry-charged battery is filled with the electrolyte for 30 minutes, the battery can be used for loading. Charging with a three-stage charger for more than 12 hours before use is beneficial for extending battery life.

1. New car charging method

It is best to use the new car first after charging. The method is to adjust the charging current to within 14A and charge for more than l5h. The first 5 to 10 times of charging time should be as long as possible, so that the permeability of the battery plate can be fully reacted, which is beneficial to improving the mileage of the whole vehicle and prolonging the service life of the battery.

2. Do you need to charge every day?

According to the user's usage habits, they are generally used during the day and charged at night. The electric tricycle can drive 80-120km with sufficient power, and the design life of the battery is more than 700 times of charging and discharging (two years).

(1) If the mileage is sufficient, it is recommended to charge only once a day.

(2) If it is not enough, you can recharge it once at noon.

(3) The state of depletion should be charged for more than 8 hours. If the electricity is not used up (less than 50km in summer and less than 30km in winter), the charging time can be shortened depending on the actual driving mileage. Experience has proved that it is generally 1h or 20km and needs to be charged for 2 hours.

(4) If you drive within less than 2 km per day, you can charge the battery for 2 days, and the charging time is more than 2 hours. Use it for a long time, and conduct a deep charge (10h or more) every 10 days.

3. charger

The charger should clean the dust on the cooling fan inside the machine after charging, which is essential to extend the service life of the charger.

4. Electric tricycle charger performance parameters input voltage: AC 220V +5%, 50Hz.

Output voltage: DC 24V, 36V, 48V, 60V, 72V (lead acid battery pack). Charging current: 0 ~ 20A.

Working environment: a 5 ° C ~ "O ° C, no flammable and explosive gases, no corrosive gases, ventilation and dry places.

Insulation resistance: ≥ l0MQ.

Maintenance of electric tricycle battery

Electric vehicles, like electric tricycles, are all lead-acid batteries.

Use and maintenance of electric vehicle battery

Lead-acid batteries are the main batteries used in electric vehicles. The batteries are not worn out but are damaged. It is by no means an alarmist. The battery charging performance plays an important role in the service life and performance of the battery.

1. The discharge depth of the battery has a great influence on the cycle life of the battery. This is because the deeper the depth of discharge, the larger the amount of expansion and contraction of the electrode, and the more the active material of the positive electrode falls off, thus losing the discharge characteristics and degrading the performance until the end of life. Therefore, the battery should be used to avoid deep discharge as much as possible, so as to be shallow and diligent, the general situation should be: the battery is best charged with a discharge depth of 50%-70%.

2. After the battery is discharged to the termination voltage, continuous discharge (overdischarge) will seriously damage the battery. This is because irreversible sulfation is easily formed at this time, which makes the charge recovery ability worse or even impossible to repair. Therefore, the battery should be protected from overdischarge when used. "Undervoltage protection" is an effective measure. The “undervoltage protection” measure is controlled by the electric vehicle controller. However, since the electric appliances such as the electric vehicle instrument and indicator light are not controlled by the controller, the electric vehicle lock starts to use electricity once it is closed, although the current is small, If it is discharged for a long time, the battery will be over-discharged. Therefore, it is not allowed to unlock for a long time, and should be turned off immediately when not in use.

3. The charging current should be less than or equal to the charging current that the battery can accept. Otherwise, the excess current generated by overcharging will cause the electrolyzed water to be consumed too quickly, and a serious gassing phenomenon will occur, which will make the charging become longer. It is very difficult, so it is possible to prevent overcharging as much as possible during charging. Chargers made by regular manufacturers ensure that the battery is not overcharged.

4. Lead-acid batteries are especially afraid of loss of electricity and discharge. If the battery is placed for 3-7 days, it will be permanently damaged. Therefore, please charge the battery as soon as possible after using it. For batteries that are not used for a long time, charge the battery once every 15 days to compensate for the loss of self-discharge when the battery is stored.

5, the battery runs in the hot season, there is mainly the problem of overcharging. Therefore, in summer, the battery temperature should be reduced as much as possible to ensure good heat dissipation, to prevent charging after sun exposure, and to stay away from heat. In the case of low temperature, charging mainly suffers from poor charging acceptance and insufficient charging to cause the battery to lose power. In case of low temperature, anti-freezing measures should be taken, especially when charging, it should be placed in a warm environment, which is beneficial to ensure sufficient electricity, prevent irreversible sulfation, and prolong the service life of the battery.

6. Under normal circumstances, the service life of a battery with a large depth of discharge is about 1 year, and the life of a battery with a depth of 50%-70% is about 1 year and a half.

The following is the recommended top ten brand recruitment information for the tricycle industry.

Henan Lizhixing Motorcycle Three Wheel Manufacturing Co., Ltd.

Chongqing Zongshen Vehicle Co., Ltd

Jiangsu Kechen Vehicle Industry Technology Co., Ltd.
Jiangsu Fuhao Vehicle Industry Co., Ltd.

Xuzhou Lesheng Vehicle Industry Co., Ltd.

Yuandi Vehicle Manufacturing Co., Ltd.

Luoyang Dazhi Three-wheeled Motorcycle Co., Ltd.

Jiangsu Jinpeng Vehicle Industry Co., Ltd.

Linyi City Yuling Electric Vehicle Co., Ltd.

Xuzhou Pingan Renjia Electric Vehicle Manufacturing Co., Ltd.


Contact Us

Author:

Ms. Lucia Peng

Phone/WhatsApp:

13531888018

Popular Products
You may also like
Related Information
Nippon Electric Co., Ltd. listed new electric torque tester

Nippon Electric Co., Ltd. has listed an electric torque tester that combines the torque meter "TNX" series with the data management function test bench "DSP-10". By combining the...

Electric double eccentric butterfly valve how to choose and installation direction

Electric double eccentric butterfly valve cut off and throttling effect in the pipeline, electric double eccentric butterfly valve opening and closing pieces is a disc-shaped disc, rotating around...

What are the common faults of electric drills? Electric drill repair Daquan

In life, we often encounter accidents like this, for example, our tools are broken. If you buy a new one, it is a bit extravagant; if you let the professional repair it, it will be fine for people to...

Valve technology Large aperture gas medium electric valve new invention

This patent was applied by Beijing Hua Chong Long Run Environmental Technology Co., Ltd., and was authorized notice on March 15, 2017. Description of content The present invention relates to the...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send