Electric toilet What are the advantages of electric toilet installation and price

As science and technology change with each passing day, people's lives have also undergone earth-shaking changes along with the development of science and technology, and daily necessities have become more and more intelligent. Today, Xiao Bian discusses the toilets we often use, and this toilet is a bit special. It is an electric toilet. So what is an electric toilet? What are the benefits of electric toilets ? How to install the electric toilet? What is the price of electric toilets? Let's take a look with Xiaobian.

What is an electric toilet

Let's first look at what is an electric toilet. Electric toilets are made up of electric scats, toilet accessories, and other accessories. Electric scavengers are divided into drainage and drainage. A one-way valve is installed at the outlet of the upper septic effluent to prevent the backflow of the sewage, completely solves the backflow of the sewage in the conventional toilet and pollutes the living environment; the lower drain can also drain normally in the event of power outage or failure, and the entire discharge process is automatic completion.

What are the benefits of electric toilets?

1, electric toilet has a beautiful appearance, suitable for modern decoration art, and modern home with a harmonious unity.

2, electric toilet has a very high use value. Other underground buildings such as underground plazas, basements, etc.; Temporary and simple houses such as construction sites, force barracks, activity houses, and dormitories; residential houses, shops, facade houses, business offices, and attics; new construction, reconstruction, and alteration of residential structures and houses; , Weak, ill, disabled or other need special care for the bedroom; Luxury villa basement; high-end KTV, high-end shopping malls, star hotels, hotels, and other places are used.

3, compared with the general toilet, the electric toilet has the characteristics of flexible discharge, not easy to block, strong discharge, health and environmental protection, energy saving and water. Such toilets use 2 L of water each time. Within two or three years, a toilet can be saved. Taking a family of five as an example, electricity consumption is less than one kilowatt per month. At the same time, it is easy to operate, easy to install, and flexible to move. Therefore, the scope of application is also relatively broad and has a high practical value.

4, electric toilet can make the pipeline is not easy to foul, never blocked.

The inadequacies of electric toilets:

1, maintenance is difficult. Electric toilets are smart devices that are cumbersome to repair once they have gone wrong.

2, difficult to operate. For the elderly and children, although the electric toilet is smart, there is a problem and it is not easy to operate.

Electric toilet installation

The following is the specific process of electric toilet installation:

1. Before the installation, the master should conduct a comprehensive inspection of the sewage pipeline to see if there is mud and sand, waste paper and other debris in the pipeline. At the same time, check whether the floor of the toilet installation is horizontal. If uneven ground is found, install the toilet. The ground should be leveled. Saw the outlet short and allow the outlet to be as high as 2mm-5mm above the ground as far as conditions permit.

2, first select the toilet before you determine your home toilet. What is the size of the water from the wall? (The standard is only 300, 400 mm).

3, and then choose according to the size of your favorite style, pay attention to the choice of water-saving type (3-6 liters), order to see the model, origin, and now the product is mixed, shop around is no regrets choice.

4, before the installation of the toilet seat to determine whether your choice of products, accessories, instructions are complete, take a closer look at the instructions, understand some of the product matters, in order to prevent pilferage, cutting corners, remember.

5, the outlet requires the installer to deal with the formation of the toilet, the bottom of the toilet to install the toilet seat flange, or apply glass glue and the mouth of the mouth evenly, the bottom of the toilet, around the plastic, the toilet and the wall gap evenly, placed Correct and stable.

6. After the toilet is in place, the water inlet is required to have no leakage, the water level is correct, the flushing is smooth, the switch is flexible, and the cover is stable.

7, now the installation of toilets generally do not install the anchor bolts, but use glass glue to plug the reserved holes in the toilet to prevent turning.

8. If installing anchor bolts, use the special sealant installed on the toilet to apply evenly to the outer 2CM of the toilet drain outlet. The toilet's drain should face the central position of the drainage pipe. The position of the swell bolt on the right and left side of the toilet, take the toilet, punch, and bury the bolt. It should be noted that this newly punched swell plug pre-buried the hole and may break the waterproof layer. It is recommended to embed the expansion screws. At the same time, fill in the sealant around the hole, and then bury the bolt, first screw the expansion bolt, let the expansion bolt completely open, strengthen its pull, then screw the upper screw, put the toilet, Then directly screw the screw, cap, keep the overall appearance. At the meeting place between the toilet bowl and the ground surface, because the toilet bowl is not integrated with the ground surface, it can be stirred with a sealant and a transparent sealant to seal the outer mouth of the toilet bowl and allow it to maintain its integrity with the ground surface. Part of the toilet water can be blocked at the periphery of the toilet.

9, after the installation of the toilet should wait until the glass glue (putty) or cement mortar curing can be used after the release of water, the curing time is generally 24 hours. If you ask an unprofessional person to install it, usually to save time, the construction staff will use cement as the adhesive directly. This is definitely not enough to fill the fixed position of the bottom of the toilet. In fact, there is a drawback in the middle. The cement itself has expansive properties and takes a long time. This method may lead to cracking of the base of the toilet bowl and it is not easy to maintain.

10. Install or debug tank accessories. First check the water pipe, discharge the water for 3-5 minutes to flush the pipe to ensure the cleanness of the water pipe; install the angle valve and connecting hose, then connect the hose to the inlet valve of the installed tank fitting and press the water source to check the water supply. Whether the valve inlet and seal are normal, check whether the installation position of the drainage valve is flexible and whether there is any jamming or leakage, and check whether there is any leakage inlet valve filter device.

Electric toilet prices

In the current domestic market, the price of electric toilets should be a minimum of 1,000 yuan. The price of middle and low tiers should be around 1,000-2,500 yuan, and the quality should be 3,000-4,000 yuan, while the high-end ones should be 5,000 yuan or even 5,000 yuan or more. Consumers must be careful to buy.

What are the benefits of electric toilets above? The installation and price of electric toilets are briefly introduced here. I hope to help you. For more information, please visit this website. Stay tuned.

Toilet