How to use electric iron for electric iron

As electronic products continue to innovate, many products are poured into our lives, bringing us a lot of convenience. Electric irons are the essential electrical products in our homes. What about electric irons ? Next we will learn more about the specifics.

How to use the electric iron, step 1 , we must first read the instructions, do related checks. Select the electric iron should first check whether the loose connection, the metal shell protective layer should not have spots, layering and peeling phenomenon, the handle should be intact. After checking the appearance, electricity should also be checked to check whether the iron has a short circuit, open circuit, or leakage. Thermostats and spray irons also check whether the technical performance meets the requirements of the product specification.

How to use the electric iron, Step 2 , use the correct steps. When using an electric iron, it is necessary to use safety measures to protect the zero (or ground): use a three-prong plug and socket to connect the power supply. Make sure the wiring is correct. Use the iron for the first time: The rust-proof grease on the surface should be wiped off first. When the iron temperature exceeds the required temperature, the power supply should be turned off to reduce the temperature.

The use of automatic thermostat iron, should pay attention to whether the temperature adjustment mechanism to prevent excessive temperature and fire. When the electric iron is in use, it should be handled with care, to prevent it from dropping, and it is even more difficult to use the iron to knock on the item so as not to damage the porcelain sleeve on the internal components and the terminal string, causing electric leakage. In case of any unexpected occurrence during use, the power supply must be disconnected and handled.

How to use the electric iron, step 3 , self-distribution power cord, the length of 2m is appropriate. If it is too long and it is not arranged properly, let the power cord be dragged to the ground. The person walking around may trip the electric iron, fall to the ground or scald and iron the cloth or even hurt.

How to use the electric iron, step 4 , for some of the more sensitive fabrics, such as silk, it is best not to use a steam iron directly against the clothes hot, hot iron away from the clothes about 1cm, medium temperature ironing.

How to use the electric iron, step 5 , during the ironing of the clothes, the electric iron should be erected, or placed on a special electric iron stand. Do not lower the iron on a flammable item to prevent it from catching fire. Also do not place the iron on iron or masonry so as not to scratch the floor plating.

How to use the electric iron, step 6 , to remove the dirt on the outer surface of the iron. Fluff on the surface of the chemical fiber fabric is easily melted and adheres to the coke on the bottom plate to form dark spots, which is not only unsightly but also inconvenient for use. In order to avoid the generation of such dirt, a clean, damp cloth can be placed on the chemical fiber fabric. If black spots appear on the bottom plate, do not use a knife to scrape it. This will destroy the coating on the bottom plate.

The most convenient and effective method is: First, use a damp cloth to dip a little toothpaste, slowly wipe the rust spot. After wiping, apply a layer of wax, turn on the power, and melt the wax and wipe it. If the rust spot is on the underside of the electric iron, use a piece of waste cloth as a pad and force it back and forth several times. Removing dirt from this method will not only damage the plating layer of the electric iron, but also restore it to its original smoothness and flatness.

The above is the introduction of how to use the electric iron. I hope to help you, and more information on decoration is on this site. Please stay tuned.

Home Furnishing